Simplicity Instructions with Self-Cure and Dual-Cure MAterials
2. Place a drop of Simplicity 1 into one cavity of the mixing well.
3. Dip the red microtip into the Simplicity 1 and gently rub it into the prep for ten seconds.
4. Shake the bottle of Simplicity 2 and dispense a drop into the second cavity of the mixing well and with the blue ultrabrush tip place 3 brushfuls of Simplicity 2, dabbing each on the prep several times.
5. Dry thoroughly for at least 5 seconds.
6. Apply two more brushfuls of Simplicity 2 and dry thoroughly again for 5 seconds.
7. Light-cure the adhesive for 10 seconds.
8. Apply another brushful of Simplicity 2, dry to remove the solvent but DO NOT LIGHT-CURE IT.
9. Apply the self-cure or dual-cure material.
Alternatively, after light-activating the Simplicity, a thin layer of flowable resin composite may be placed onto the prep and light-activated. The core material may then be applied.
Copyright © 2002 - John Kanca III,DMD
All Rights Reserved
Webmaster: Your Name - John Kanca III,DMD@simplicityadhesive.com